• zipen

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Parr Reactor, Titanium Reactor, Packing For Hydrogen Peroxide Production, We appreciate your enquiry and it's our honor to work with every friend worldwide.
Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen Detail:

Industry standard

Our products conforms to HG/T 3927-2007
Properties of alumina special for hydrogen peroxide
Crystal phase: γ-Al2O3
Specification (mm): 7~14 mesh Φ 3~5, Φ4~6, Φ5~7
Exterior: White ball granule
Heap density (g/cm3): 0.68-0.75
Strength (N/grain): >50
Surface area (m2/g): 200~260
Pore volume (cm3/g): 0.40~0.46
Large hole (>750A): 0.14
Water absorption (%): >50

Application of activated alumina as adsorbent

The main liquids that activated alumina can be dried are: aromatic hydrocarbons, polymer olefins, gasoline, kerosene, cyclohexane, propylene, butene, and many halogenated hydrocarbons. When these liquids are in contact with alumina, the two will not react or polymerize. At the same time, the dry liquid does not contain components that are easily adsorbed on the alumina surface and are not easily removed during regeneration.

Factors affecting adsorption performance

1. Particle size: The smaller the particle size, the higher the adsorption capacity, but the smaller the particle size, the lower the particle strength, which affects its service life.
2. Raw water pH value: When the pH value is higher than 5, the lower the pH value, the higher the adsorption capacity of activated alumina.
3. Initial fluorine concentration in raw water: the higher the initial fluorine concentration, the larger the adsorption capacity.
4. The alkalinity of the raw water: the high concentration of bicarbonate in the raw water will reduce the adsorption capacity.
5. Chloride ion and sulfate ion.
6. The influence of arsenic: activated alumina has an adsorption effect on arsenic in water. The accumulation of arsenic on activated alumina causes a decrease in the adsorption capacity of fluoride ions, and makes it difficult to elute arsenic ions during regeneration.


Product detail pictures:

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures


Related Product Guide:

Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for Chinese Professional Polyether Polyol Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen , The product will supply to all over the world, such as: Switzerland, Ukraine, USA, Till now, the items list has been updated regularly and attracted clients from around the globe. Comprehensive facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are likely to help you get thorough acknowledge about our goods and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
  • The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By Olive from Philippines - 2018.08.12 12:27
    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Christian from Manchester - 2018.06.28 19:27
    Write your message here and send it to us

    Related products

    • Factory Wholesale EAQ - Ceramic Ball – Zipen

      Factory Wholesale EAQ - Ceramic Ball – Z...

      Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...

    • Low Price For Rectifier - TOP, Tris(2-ethylhexyl) Phosphate, CAS# 78-42-2, Trioctyl Phosphate – Zipen

      Low Price For Rectifier - TOP, Tris(2-ethylhex...

      Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point  ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; or IBC drum, N.W 930KG. Storage Stored in dry, cool and ventilated warehouse. Packing

    • Factory Source Hastelloy Reaction System - Experimental Nylon reaction system – Zipen

      Factory Source Hastelloy Reaction System - Exp...

      Product Description The reactor is supported on the aluminum alloy frame. The reactor adopts a flanged structure with a reasonable structure and a higher degree of standardization. It can be used for chemical reactions of various materials under high temperature and high pressure. It is especially suitable for stirring and reaction of high-viscosity materials. 1. Material: The reactor is mainly made of S.S31603. 2. Stirring method: It adopts a strong magnetic coupling structure, and a s...

    • Hot New Products Polymer Polyol Pilot - Hydrogen Peroxide Production Material 2-ethyl-Anthraquinone  – Zipen

      Hot New Products Polymer Polyol Pilot - Hydrog...

      Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes  Melting Point 109~111 ℃ EAQ content ≥  98.5 %  Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing

    • Free Sample For China Hydrothermal Autoclave With Teflon Lining - Hydrogen Peroxide Stabilizer – Zipen

      Free Sample For China Hydrothermal Autoclave Wi...

      Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃)  ≥1.06g/cm3 PH value  1.0~3.0 Stabilizing effect on hydrogen peroxide   the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃)  ≥1.03g/cm3 PH value  1.0~2.0 Stabilizing effect on hydrogen peroxide   the stability of hydrogen peroxide is i...

    • China Gold Supplier For Dimeryl Diisocyanate - DDI, CAS: 68239-06-5 Dimeryl Diisocyanate, Dimeryl-di- isocyanate – Zipen

      China Gold Supplier For Dimeryl Diisocyanate -...

      DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...