• zipen

Products

  • Experimental polyether reaction system

    Experimental polyether reaction system

    The whole set of reaction system is integrated on a stainless-steel frame. The PO/EO feeding valve is fixed on the frame to prevent the electronic scale measurement from being affected during operation.

    The reaction system is connected with stainless steel pipeline and needle valves, which is easy for disconnection and re-connection.

  • Bench Top Reactor, Floor stand Reactor

    Bench Top Reactor, Floor stand Reactor

    The bench top reactor integrates the advantages of high-temperature and high-pressure reactor and automation, intelligent, with a volume of 100-1000ml, simple and intuitive touch screen operation and clear operation interface, which solves the mechanical and cumbersome problems of traditional button control; It can record and collect all real-time data and display them on the touch screen with online graphics, such as reaction temperature, pressure, time, mixing speed, etc., which can be easily viewed and analyzed by users at any time, and can be exported with USB flash disk. It can generate temperature, pressure and speed curves, and realize unattended operation.

  • Polymer polyols (POP) reaction system

    Polymer polyols (POP) reaction system

    This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions.

    Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve.

  • Experimental PX continuous oxidation system

    Experimental PX continuous oxidation system

    This system is used for the continuous PX oxidation reaction, and can be used for the simulation of the tower type and the kettle type in industrial production. The system can ensure the continuous feeding of raw materials and the continuous discharging of product, and meet the continuity requirements of the experiment.

  • High Temperature & High Pressure Magnetic Reactor

    High Temperature & High Pressure Magnetic Reactor

    1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃.

    2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy.

  • Hydrothermal Synthesis Reactors

    Hydrothermal Synthesis Reactors

    The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions.

    The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed.

  • Homogeneous Reactor/Hydrothermal Reaction Rotary Oven

    Homogeneous Reactor/Hydrothermal Reaction Rotary Oven

    The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. 

  • Pilot/Industrial magnetic stirred reactors

    Pilot/Industrial magnetic stirred reactors

    The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and is used to complete the pressure vessel of vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation, etc. According to different production processes, operating conditions, etc, the design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment.

  • Catalyst evaluation system

    Catalyst evaluation system

    Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under the conditions of temperature and pressure set by the user. 

  • Experimental rectification system

    Experimental rectification system

    The system is a continuous neopentyl glycol NPG rectification unit automatically controlled by a computer, which consists of four parts: material preparation unit, material feeding unit, rectification tower unit and product collection unit. The system is available for both remote control by means of IPC and manual control by means of on-site control cabinet.

  • Experimental nitrile latex reaction system

    Experimental nitrile latex reaction system

    This system is used for experimental research and development of nitrile latex, using manual control of continuous feeding and batch reaction.

    The system adopts the modular design concept, and all the equipment and pipelines are arranged in the frame, which includes three parts: raw material storage tank, feeding unit and reaction unit.

    PID instrument control system is used. The whole system is a safe and efficient experimental platform.

  • Experimental Nylon reaction system

    Experimental Nylon reaction system

    The reactor is supported on the aluminum alloy frame. The reactor adopts a flanged structure with a reasonable structure and a higher degree of standardization. It can be used for chemical reactions of various materials under high temperature and high pressure. It is especially suitable for stirring and reaction of high-viscosity materials.

12 Next > >> Page 1 / 2