Factory Price For Hydrothermal Autoclave Reactor With Teflon Chamber - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen
Factory Price For Hydrothermal Autoclave Reactor With Teflon Chamber - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen Detail:
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions.
The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and reaction is fully and thoroughly, which is better than the simple thermostatic effect. The casing on the stirring rod is equipped with a retainer ring (according to the size of the reaction vessel), can be fixed micro reaction vessel 6,8,10,12, at the same time, can be customized according to user requirements. In general, the cabinet body size is 400*400*450mm, and the inside of the cabinet can be filled with 8 pieces 100ML reactor vessel. The specific size is subject to the customer’s demand.
Technical parameter
| Hydrothermal Synthesis Reactor Unit | |
| Model | ZP-4/6/8/12 |
| Working Voltage | 220×(1±10%)V, AC 50Hz/60Hz |
| Design Temperature | 300℃ |
| Operating Temperature | ≤200℃ (Teflon inner vessel) |
| Temperature Fluctuation | ±0.5℃ |
| Motor Speed | 0-70r/min |
| Material | 304 Stainless Steel |
| Retainer rings | 4/6/8/12 |
| Control System | Side control box |
What’s the Homogeneous Reactor?
Homogeneous Reactor is used on reaction test for the same group of media under different condition or the different group of media under same conditions. It is made of stainless steel and double-toughened glass, the test process is continuously circulated in the close environment, in this case, the temperature in the cabinet becomes equal as well.
Three-dimensional Rotating Shaft
Hydrothermal synthesis reactor
Motor
Our Advantage of Hydrothermal Synthesis Reactor Unit?
1. Our product is made of stainless steel, which can avoid any rust or corrosion.
2. The rotating shaft makes the reaction speed fast, fully and thoroughly, which is better than the simple thermostatic effect.
3. The high quality high temperature resistance handle can avoid any scald efficiently.
Product detail pictures:
Related Product Guide:
We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Factory Price For Hydrothermal Autoclave Reactor With Teflon Chamber - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen , The product will supply to all over the world, such as: Moldova, Saudi Arabia, Kyrgyzstan, High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. If you are interested in any of our products or have an OEM order to fulfill, please feel free to contact us now. Working with us will save you money and time.
By Ophelia from Munich - 2018.06.21 17:11
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Belinda from Sierra Leone - 2017.04.08 14:55
Related products
-
Good Wholesale Vendors Pilot Reactor For Px Oxi...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
New Fashion Design For Medical Magnetic Stirrer...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
Factory Cheap Hot Polyether Polyol Pilot - DDI...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Competitive Price For Ethyl Anthraquinone - Hy...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
Factory Source China Hydrothermal Synthesis Rea...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
Wholesale Price Pyrolysis Reactor - High Tempe...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...