Free Sample For Titanium Reaction System - Experimental rectification system – Zipen
Free Sample For Titanium Reaction System - Experimental rectification system – Zipen Detail:
Product performance and structural features
The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler’s weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control.
The temperature of the rectification unit is achieved by the comprehensive cooperation of preheating, tower bottom temperature control and tower temperature control. The tower top condenser needs to maintain a certain temperature during condensation, which is achieved by an external oil bath circulator.
The reflux ratio control is realized by the reflux head with heat and heat preservation and the controller. The vacuum of the system is realized by a vacuum pump with variable frequency speed regulation. The whole set of equipment adopts the control mode that the on-site control cabinet and the remote computer cooperate with each other, which can be operated on-site, but also can realize the remote automatic control of the computer. At the same time, it saves historical data and curves for analysis and calculation. The whole set of equipment is integrated in an overall frame, easy to operate, safe and reliable.
Design conditions and technical parameters
| Design pressure | -0.1MPa, reaction pressure: -0.1MPa (MAX) |
| Design temperature | room temperature -300℃ |
| Tower kettle working temperature | 250℃ (MAX) |
| Distillation tower working temperature | 200℃ (MAX) |
| Distillation tower DN40*700 has four sections, which can be assembled into three or two sections | |
| Processing capacity | 1~2kg/h neopentyl glycol |
Public works requirements
This device requires the user to provide the following infrastructure:
Power supply: 380 VAC / 3 phase / 50 Hz
Cable: 3*16 square +2
Nitrogen gas source
Cooling water source
Product detail pictures:
Related Product Guide:
We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Free Sample For Titanium Reaction System - Experimental rectification system – Zipen , The product will supply to all over the world, such as: Montpellier, Holland, Tajikistan, With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.
By Denise from Nicaragua - 2018.06.26 19:27
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Elaine from Durban - 2017.08.21 14:13
Related products
-
Factory Supply Laboratory High Pressure Reactor...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...
-
Reasonable Price Hydrogenation Catalyst - Acti...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
Factory Supply Laboratory High Pressure Reactor...
The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and is used to complete the pressure vessel of vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation, etc. According to different production processes, operating conditions, etc, the design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment. The materials generally in...
-
Factory Cheap Hot Hydrogenation - TOP, Tris(2-...
Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; or IBC drum, N.W 930KG. Storage Stored in dry, cool and ventilated warehouse. Packing
-
Free Sample For China Hydrothermal Autoclave Wi...
Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...
-
8 Year Exporter Stainless Steel Hydrothermal Re...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...