Manufactur Standard Custom Reaction System - Polymer polyols (POP) reaction system – Zipen
Manufactur Standard Custom Reaction System - Polymer polyols (POP) reaction system – Zipen Detail:
Product Description
This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions.
Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve.
The liquid material is accurately metered by an electronic scale and fed into the system by a constant flux pump.
The material react firstly in the stirred tank reactor under the user-set temperature and pressure, then is discharged to the tubular reactor for further reaction. The product after reaction is condensed in a condenser and collected for offline analysis.
Operating characteristics: The pressure stabilization of the system is realized by the cooperation of the gas pressure control valve and the pneumatic pressure control valve at the outlet of reactor. The temperature is controlled by PID temperature control method. The whole set of equipment could be controlled by the field control cabinet as well as the remote industrial computer. The data could be recorded and curves could be used for calculation and analysis.
What’s main technical indicator for POP Pilot Plant?
Reaction pressure: 0.6Mpa; (MAX).
Design pressure: 0.8MPa.
Stirred reactor temperature control range: 170℃(MAX), temperature control accuracy: ±0.5℃.
Tube reactor temperature control range: 160 ℃ (MAX), temperature control accuracy: ±0.5℃.
The normal operating flow of the metering pump is 200-1200g/h.
Alarm process conditions:
1. Alarm when the experimental operating temperature is ≤85℃.
2. Alarm when the experimental operating temperature is ≥170℃.
3. Alarm when the experimental operating pressure is ≥0.55MPa.
Product detail pictures:
Related Product Guide:
Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Manufactur Standard Custom Reaction System - Polymer polyols (POP) reaction system – Zipen , The product will supply to all over the world, such as: Rome, Cyprus, Pretoria, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Evelyn from Sudan - 2018.11.02 11:11
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Arthur from Rotterdam - 2018.09.21 11:01
Related products
-
Special Design For 2-Ethyl-Anthraquinone - TOP...
Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; or IBC drum, N.W 930KG. Storage Stored in dry, cool and ventilated warehouse. Packing
-
China Cheap Price Nitrile Latex Experimental Sy...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
Reliable Supplier Magnetic Reactor - Pilot/Ind...
The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and is used to complete the pressure vessel of vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation, etc. According to different production processes, operating conditions, etc, the design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment. The materials generally in...
-
Lowest Price For Teflon Lined Reactor - High T...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...
-
High Quality Parallel Reactor - Hydrothermal S...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
OEM Manufacturer Hydrothermal Synthesis Kettle ...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...