New Delivery For Magnetic Stirred Production Reactor - Hydrothermal Synthesis Reactors – Zipen
New Delivery For Magnetic Stirred Production Reactor - Hydrothermal Synthesis Reactors – Zipen Detail:
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions.
The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal synthesis reactor unit used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and the reaction is fully and thoroughly, which is better than the simple thermostatic effect.
What’s the features of the stainless steel hydrothermal synthesis reactor unit?
Features
1. Motor Speed: 0-70r/min, Variable frequency.
2. Tank Volume: 10-1000mll.
3. Max. temperature: 300℃.
4. Tank material: 316 stainless steel.
5. Programmed temperature control; Side control box.
This is the most ideal device for chemical reactions under high temperature and high pressure.
Target customers
Laboratories in universities, research institutes, corporate.
What is the Stainless Steel Hydrothermal Synthesis Reactor Unit used for?
Catalytic reaction, polymerization reaction, supercritical reaction, high-temperature and high-pressure synthesis, hydrogenation reaction, hydrometallurgy, esterification reaction, perfume synthesis, slurry reaction Pentafluoroethyl iodide synthesis, ethylene oligomerization, hydrodesulfurization, hydrodenitrogenation, oxide hydrogenolysis, hydrodemetalization, unsaturated hydrocarbon hydrogenation, petroleum hydrocracking, olefin oxidation, aldehyde oxidation, liquid phase oxidation Impurity removal, catalytic coal liquefaction, rubber synthesis, lactic acid polymerization, n-butene isomerization reaction, hydrogen reaction, polyester synthesis reaction, p-xylene oxidation reaction.
Our advantage of stainless-steel hydrothermal synthesis reactor unit?
1. The reactor is made of stainless-steel with high corrosion resistance for low maintenance cost.
2. Different vessels are available.
3. Perfect for experiments in universities, research institutes, corporates.
Product detail pictures:
Related Product Guide:
Good quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is regularly observed and pursued by our company for New Delivery For Magnetic Stirred Production Reactor - Hydrothermal Synthesis Reactors – Zipen , The product will supply to all over the world, such as: Holland, Madagascar, Iceland, To have much more enterprise. ompanions, we've got updated the item list and seek for optimistic co-operation. Our web-site shows the latest and complete information and facts about our merchandise list and company. For further acknowledge, our consultant service group in Bulgaria will reply to all of the inquiries and complications immediately. They're about to make their finest effort to meet buyers need. Also we support the delivery of absolutely free samples. Business visits to our business in Bulgaria and factory are generally welcome for a win-win negotiation. Hope to expertise a happy company co-operation perform with you.
By Ivy from Auckland - 2018.12.05 13:53
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Pearl Permewan from Vietnam - 2018.10.09 19:07
Related products
-
Wholesale Discount Hydrothermal Synthesis Oven ...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
Factory Cheap Hot Polyether Polyol Pilot - DDI...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
China Gold Supplier For Magnetic Stirrer - TOP...
Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; or IBC drum, N.W 930KG. Storage Stored in dry, cool and ventilated warehouse. Packing
-
Well-Designed Polymer Polyol Pilot Plant - Cer...
Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...
-
Hot-Selling Experimental Rectification - Activ...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
OEM China Parallel Reaction System - Experimen...
Product performance and structural features The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler’s weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control. The temperature of the rectification unit is achieved by the comprehensive cooperation of preheating, tower bottom temperature control and tower temperature control. The towe...