Newly Arrival Tris(2-Ethylhexyl) Phosphate - Hydrogen Peroxide Stabilizer – Zipen
Newly Arrival Tris(2-Ethylhexyl) Phosphate - Hydrogen Peroxide Stabilizer – Zipen Detail:
Specification
| TYPE II | |
| Stannum containing stabilizer | |
| Appearance | Light yellow transparent liquid |
| Density (20℃) | ≥1.06g/cm3 |
| PH value | 1.0～3.0 |
| Stabilizing effect on hydrogen peroxide | the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% |
| TYPE IV | |
| Phosphorus containing stabilizer | |
| Appearance | colorless transparent liquid |
| Density (20℃) | ≥1.03g/cm3 |
| PH value | 1.0～2.0 |
| Stabilizing effect on hydrogen peroxide | the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% |
Usage
Add 10 ~ 100g of stabilizer per ton of hydrogen peroxide. The dosage can be appropriately reduced according to the stability of raw hydrogen peroxide. Fully mix it by stirring or clean air purging.
Package and storage
25kg PE barrel.
It should be stored in warehouses and sheds with ventilation, and the storage temperature should be below 35°C.
Product detail pictures:
Related Product Guide:
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Newly Arrival Tris(2-Ethylhexyl) Phosphate - Hydrogen Peroxide Stabilizer – Zipen , The product will supply to all over the world, such as: Greenland, Czech republic, Georgia, Welcome to visit our company and factory, there are various products displayed in our showroom that will meet your expectation, meanwhile, if you are convenient to visit our website, our sales staff will try their efforts to provide you the best service
By Grace from Yemen - 2017.09.22 11:32
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Alexandra from Serbia - 2018.12.11 11:26
Related products
-
Factory Cheap Hot Hydrogenation - Hydrogen Per...
Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes Melting Point 109～111 ℃ EAQ content ≥ 98.5 % Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing
-
Factory Low Price Homogeneous Reaction Oven - ...
This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions. Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under the conditions of tempera...
-
OEM Customized China 200ml Hydrothermal Synthes...
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions. The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synt...
-
Special Price For 200l Pilot Reactor - Bench T...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
OEM Factory For Teflon Lined Hydrothermal Autoc...
Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes Melting Point 109～111 ℃ EAQ content ≥ 98.5 % Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing
-
PriceList For Small Scale Nylon Production - H...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...