• zipen

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for Polymer Polyol Experiment, Hydrothermal Reactor, DDI, "Making the Products of Large Quality" is definitely the everlasting purpose of our enterprise. We make unremitting endeavours to know the target of "We Will Always Hold in Pace along with the Time".
OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen Detail:

Industry standard

Our products conforms to HG/T 3927-2007
Properties of alumina special for hydrogen peroxide
Crystal phase: γ-Al2O3
Specification (mm): 7~14 mesh Φ 3~5, Φ4~6, Φ5~7
Exterior: White ball granule
Heap density (g/cm3): 0.68-0.75
Strength (N/grain): >50
Surface area (m2/g): 200~260
Pore volume (cm3/g): 0.40~0.46
Large hole (>750A): 0.14
Water absorption (%): >50

Application of activated alumina as adsorbent

The main liquids that activated alumina can be dried are: aromatic hydrocarbons, polymer olefins, gasoline, kerosene, cyclohexane, propylene, butene, and many halogenated hydrocarbons. When these liquids are in contact with alumina, the two will not react or polymerize. At the same time, the dry liquid does not contain components that are easily adsorbed on the alumina surface and are not easily removed during regeneration.

Factors affecting adsorption performance

1. Particle size: The smaller the particle size, the higher the adsorption capacity, but the smaller the particle size, the lower the particle strength, which affects its service life.
2. Raw water pH value: When the pH value is higher than 5, the lower the pH value, the higher the adsorption capacity of activated alumina.
3. Initial fluorine concentration in raw water: the higher the initial fluorine concentration, the larger the adsorption capacity.
4. The alkalinity of the raw water: the high concentration of bicarbonate in the raw water will reduce the adsorption capacity.
5. Chloride ion and sulfate ion.
6. The influence of arsenic: activated alumina has an adsorption effect on arsenic in water. The accumulation of arsenic on activated alumina causes a decrease in the adsorption capacity of fluoride ions, and makes it difficult to elute arsenic ions during regeneration.


Product detail pictures:

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures


Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our enterprise with the long-term to build with each other with consumers for mutual reciprocity and mutual advantage for OEM Factory For Teflon Lined Hydrothermal Autoclave - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen , The product will supply to all over the world, such as: Lahore, Atlanta, Denmark, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
  • It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Henry from South Korea - 2018.09.16 11:31
    The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
    5 Stars By Nicola from Pakistan - 2018.06.18 19:26
    Write your message here and send it to us

    Related products

    • Hot Sale For High-Pressure Magnetic Stirring Reactors - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen

      Hot Sale For High-Pressure Magnetic Stirring Re...

      The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions. The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synt...

    • Reasonable Price For Batch Reactor - Pilot/Industrial magnetic stirred reactors – Zipen

      Reasonable Price For Batch Reactor - Pilot/Ind...

      The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and is used to complete the pressure vessel of vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation, etc. According to different production processes, operating conditions, etc, the design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment. The materials generally in...

    • 2022 Wholesale Price Autoclave - TOP, Tris(2-ethylhexyl) Phosphate, CAS# 78-42-2, Trioctyl Phosphate – Zipen

      2022 Wholesale Price Autoclave - TOP, Tris(2-e...

      Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point  ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; or IBC drum, N.W 930KG. Storage Stored in dry, cool and ventilated warehouse. Packing

    • OEM/ODM Manufacturer Hydrothermal Autoclave - Hydrogen Peroxide Production Material 2-ethyl-Anthraquinone  – Zipen

      OEM/ODM Manufacturer Hydrothermal Autoclave - ...

      Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes  Melting Point 109~111 ℃ EAQ content ≥  98.5 %  Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing

    • Hot Sale Paraxylene Pilot - Ceramic Ball – Zipen

      Hot Sale Paraxylene Pilot - Ceramic Ball ̵...

      Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...

    • Professional Design Raw Material For Hydrogen Peroxide Production - Hydrogen Peroxide Production Material 2-ethyl-Anthraquinone  – Zipen

      Professional Design Raw Material For Hydrogen P...

      Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes  Melting Point 109~111 ℃ EAQ content ≥  98.5 %  Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing