OEM Supply Polyether Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen
OEM Supply Polyether Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen Detail:
Industry standard
Our products conforms to HG/T 3927-2007
Properties of alumina special for hydrogen peroxide
Crystal phase: γ-Al2O3
Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7
Exterior: White ball granule
Heap density (g/cm3): 0.68-0.75
Strength (N/grain): >50
Surface area (m2/g): 200～260
Pore volume (cm3/g): 0.40～0.46
Large hole (>750A): 0.14
Water absorption (%): >50
Application of activated alumina as adsorbent
The main liquids that activated alumina can be dried are: aromatic hydrocarbons, polymer olefins, gasoline, kerosene, cyclohexane, propylene, butene, and many halogenated hydrocarbons. When these liquids are in contact with alumina, the two will not react or polymerize. At the same time, the dry liquid does not contain components that are easily adsorbed on the alumina surface and are not easily removed during regeneration.
Factors affecting adsorption performance
1. Particle size: The smaller the particle size, the higher the adsorption capacity, but the smaller the particle size, the lower the particle strength, which affects its service life.
2. Raw water pH value: When the pH value is higher than 5, the lower the pH value, the higher the adsorption capacity of activated alumina.
3. Initial fluorine concentration in raw water: the higher the initial fluorine concentration, the larger the adsorption capacity.
4. The alkalinity of the raw water: the high concentration of bicarbonate in the raw water will reduce the adsorption capacity.
5. Chloride ion and sulfate ion.
6. The influence of arsenic: activated alumina has an adsorption effect on arsenic in water. The accumulation of arsenic on activated alumina causes a decrease in the adsorption capacity of fluoride ions, and makes it difficult to elute arsenic ions during regeneration.
Product detail pictures:
Related Product Guide:
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for OEM Supply Polyether Experiment - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen , The product will supply to all over the world, such as: Costa Rica, Bangkok, Casablanca, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By ron gravatt from Madrid - 2018.02.12 14:52
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Aaron from French - 2018.02.12 14:52
Related products
-
Factory Supplied Parr Instrument - DDI, CAS: 6...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
100% Original Factory Parr Reactor - Hydrother...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
OEM Manufacturer PPL Lined Hydrothermal Synthes...
The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and is used to complete the pressure vessel of vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation, etc. According to different production processes, operating conditions, etc, the design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment. The materials generally in...
-
Good Wholesale Vendors Pilot Reactor For Px Oxi...
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions. The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synt...
-
Top Suppliers Multi-Reactor System - Bench Top...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
Leading Manufacturer For High Pressure Reactor ...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...