OEM/ODM Manufacturer Polyether Reaction - Catalyst evaluation system – Zipen
OEM/ODM Manufacturer Polyether Reaction - Catalyst evaluation system – Zipen Detail:
This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions.
Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under the conditions of temperature and pressure set by the user.
Operating characteristics: The pressure stability of the system is precisely controlled by the cooperation of the inlet gas pressure control valve and the vent gas counterbalance valve. Temperature control adopts PID intelligent temperature control meter to control electric heating elements. For the temperature runaway caused by the exotherm in the reaction process, the computer will automatically complete the PID control by regulating the cooling water flow according to the degree of temperature runaway. The whole system integrates temperature, pressure, stirring, flow control, inlet gas pressure regulation, and pressure counterbalance into a cabinet.
The overall dimensions are 500*400*600.
Product Description
The pressure stability of the system is precisely controlled by the cooperation of the inlet gas pressure control valve and the vent gas counterbalance valve; The hydrogen gas flow is accurately measured by Brooks flowmeter, which is equipped with a bypass and a manual micro-control valve; According to the features of hydrogenation reaction, the control of reaction temperature is realized through PID control of the heating furnace and the cooling water flow rate as well as temperature runaway. The whole set of equipment is integrated in an overall frame, easy for installation and operation, safe and reliable.
Technical Specification
| Reaction pressure | 0.3MPa (3 bar) |
| Design pressure | 1.0MPa (10 bar) |
| Reaction temperature | 60℃, accuracy: ±0.5℃ |
| Temperature runaway control | Automatically control the cooling water flow, temperature runaway<2℃ |
| Stirring speed | 0-1500r/min |
| Effective volume | 500ml |
| Inserted filter in reactor | 15～20μm |
| Range of gas mass flow controller | 200SCCM |
| Flow range of Rotameter | 100ml/min |
| Pneumatic cooling water control valve | CV: 0.2 |
Product detail pictures:
Related Product Guide:
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for OEM/ODM Manufacturer Polyether Reaction - Catalyst evaluation system – Zipen , The product will supply to all over the world, such as: St. Petersburg, Turkey, Ecuador, We've been persisting in the business essence "Quality First, Honoring Contracts and Standing by Reputations, providing customers with satisfying products and service. " Friends both at home and abroad are warmly welcome to establish everlasting business relations with us.
By Frank from Frankfurt - 2017.08.28 16:02
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Mary from Rio de Janeiro - 2018.12.10 19:03
Related products
-
High Performance Micro Batch Reaction System -...
This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions. Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under the conditions of tempera...
-
Competitive Price For Ethyl Anthraquinone - Hy...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
Leading Manufacturer For High Pressure Reactor ...
The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and is used to complete the pressure vessel of vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation, etc. According to different production processes, operating conditions, etc, the design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment. The materials generally in...
-
Best Price For High Pressure Hydrothermal React...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
Wholesale Price China Polymer Experiment - Act...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
Factory Customized HP/HT Reactor - High Temper...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...