OEM/ODM Manufacturer Polyether Reaction - Experimental rectification system – Zipen
OEM/ODM Manufacturer Polyether Reaction - Experimental rectification system – Zipen Detail:
Product performance and structural features
The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler’s weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control.
The temperature of the rectification unit is achieved by the comprehensive cooperation of preheating, tower bottom temperature control and tower temperature control. The tower top condenser needs to maintain a certain temperature during condensation, which is achieved by an external oil bath circulator.
The reflux ratio control is realized by the reflux head with heat and heat preservation and the controller. The vacuum of the system is realized by a vacuum pump with variable frequency speed regulation. The whole set of equipment adopts the control mode that the on-site control cabinet and the remote computer cooperate with each other, which can be operated on-site, but also can realize the remote automatic control of the computer. At the same time, it saves historical data and curves for analysis and calculation. The whole set of equipment is integrated in an overall frame, easy to operate, safe and reliable.
Design conditions and technical parameters
| Design pressure | -0.1MPa, reaction pressure: -0.1MPa (MAX) |
| Design temperature | room temperature -300℃ |
| Tower kettle working temperature | 250℃ (MAX) |
| Distillation tower working temperature | 200℃ (MAX) |
| Distillation tower DN40*700 has four sections, which can be assembled into three or two sections | |
| Processing capacity | 1~2kg/h neopentyl glycol |
Public works requirements
This device requires the user to provide the following infrastructure:
Power supply: 380 VAC / 3 phase / 50 Hz
Cable: 3*16 square +2
Nitrogen gas source
Cooling water source
Product detail pictures:
Related Product Guide:
The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for OEM/ODM Manufacturer Polyether Reaction - Experimental rectification system – Zipen , The product will supply to all over the world, such as: New Orleans, Chile, Manchester, We are your reliable partner in the international markets of our products. We focus on providing service for our clients as a key element in strengthening our long-term relationships. The continual availability of high grade products in combination with our excellent pre- and after-sales service ensures strong competitiveness in an increasingly globalized market. We are willing to cooperate with business friends from at home and abroad, to create a great future. Welcome to Visit our factory. Looking forward to have win-win cooperation with you.
By Flora from Riyadh - 2017.04.18 16:45
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Eleanore from Boston - 2018.04.25 16:46
Related products
-
Best Price For High Pressure Hydrothermal React...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
China Manufacturer For TOP For Hydrogen Peroxid...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
High Quality PX Oxidation Experimental System -...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
Manufacturer For Hydrogenation Reactor - Pilot...
The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and is used to complete the pressure vessel of vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation, etc. According to different production processes, operating conditions, etc, the design structure and parameters of the reactor are different, that is, the structure of the reactor is different, and it belongs to non-standard container equipment. The materials generally in...
-
Newly Arrival Polyester Resin Reactor - High T...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...
-
Wholesale Paraxylene Experiment - Hydrogen Per...
Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes Melting Point 109～111 ℃ EAQ content ≥ 98.5 % Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing