Reliable Supplier DDI - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen
Reliable Supplier DDI - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen Detail:
Industry standard
Our products conforms to HG/T 3927-2007
Properties of alumina special for hydrogen peroxide
Crystal phase: γ-Al2O3
Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7
Exterior: White ball granule
Heap density (g/cm3): 0.68-0.75
Strength (N/grain): >50
Surface area (m2/g): 200～260
Pore volume (cm3/g): 0.40～0.46
Large hole (>750A): 0.14
Water absorption (%): >50
Application of activated alumina as adsorbent
The main liquids that activated alumina can be dried are: aromatic hydrocarbons, polymer olefins, gasoline, kerosene, cyclohexane, propylene, butene, and many halogenated hydrocarbons. When these liquids are in contact with alumina, the two will not react or polymerize. At the same time, the dry liquid does not contain components that are easily adsorbed on the alumina surface and are not easily removed during regeneration.
Factors affecting adsorption performance
1. Particle size: The smaller the particle size, the higher the adsorption capacity, but the smaller the particle size, the lower the particle strength, which affects its service life.
2. Raw water pH value: When the pH value is higher than 5, the lower the pH value, the higher the adsorption capacity of activated alumina.
3. Initial fluorine concentration in raw water: the higher the initial fluorine concentration, the larger the adsorption capacity.
4. The alkalinity of the raw water: the high concentration of bicarbonate in the raw water will reduce the adsorption capacity.
5. Chloride ion and sulfate ion.
6. The influence of arsenic: activated alumina has an adsorption effect on arsenic in water. The accumulation of arsenic on activated alumina causes a decrease in the adsorption capacity of fluoride ions, and makes it difficult to elute arsenic ions during regeneration.
Product detail pictures:
Related Product Guide:
Our corporation insists all along the quality policy of "product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" plus the consistent purpose of "reputation very first, purchaser first" for Reliable Supplier DDI - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen , The product will supply to all over the world, such as: Birmingham, Maldives, Ireland, We have advanced production technology, and pursuit innovative in goods. At the same time, the good service has enhanced the good reputation. We believe that as long as you understand our product, you need to be willing to become partners with us. Looking forward to your inquiry.
By Marina from Los Angeles - 2018.05.15 10:52
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Dawn from Milan - 2018.09.16 11:31
Related products
-
Europe Style For 30l Polymer Pilot Reactor - H...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
Hot Sale Factory Micro Reactor - Hydrothermal ...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
Leading Manufacturer For High Pressure Reactor ...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
Big Discount 68239-06-5 - Ceramic Ball –...
Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...
-
Factory Selling Hydrothermal Synthesis - Ceram...
Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...
-
Fast Delivery Nitrile Latex Pilot - Hydrogen P...
Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes Melting Point 109～111 ℃ EAQ content ≥ 98.5 % Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing