Renewable Design For Nylon Synthesis Experiment - Hydrogen Peroxide Stabilizer – Zipen
Renewable Design For Nylon Synthesis Experiment - Hydrogen Peroxide Stabilizer – Zipen Detail:
Specification
| TYPE II | |
| Stannum containing stabilizer | |
| Appearance | Light yellow transparent liquid |
| Density (20℃) | ≥1.06g/cm3 |
| PH value | 1.0~3.0 |
| Stabilizing effect on hydrogen peroxide | the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% |
| TYPE IV | |
| Phosphorus containing stabilizer | |
| Appearance | colorless transparent liquid |
| Density (20℃) | ≥1.03g/cm3 |
| PH value | 1.0~2.0 |
| Stabilizing effect on hydrogen peroxide | the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% |
Usage
Add 10 ~ 100g of stabilizer per ton of hydrogen peroxide. The dosage can be appropriately reduced according to the stability of raw hydrogen peroxide. Fully mix it by stirring or clean air purging.
Package and storage
25kg PE barrel.
It should be stored in warehouses and sheds with ventilation, and the storage temperature should be below 35°C.
Product detail pictures:
Related Product Guide:
Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Renewable Design For Nylon Synthesis Experiment - Hydrogen Peroxide Stabilizer – Zipen , The product will supply to all over the world, such as: Iraq, Malawi, Kuwait, Now we've been sincerely consider to grant brand agent in different areas and our agents' maximum margin of profit is the most important thing we care about. Welcome all of the friends and customers to join us. We have been ready to share win-win corporation.
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
Write your message here and send it to us




