• zipen

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for Hydrothermal Synthesis, Nylon Reactor, 30l Polymer Pilot Reactor, We welcome you to join us in this path of creating a prosperous and efficient business together.
Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen Detail:

Industry standard

Our products conforms to HG/T 3927-2007
Properties of alumina special for hydrogen peroxide
Crystal phase: γ-Al2O3
Specification (mm): 7~14 mesh Φ 3~5, Φ4~6, Φ5~7
Exterior: White ball granule
Heap density (g/cm3): 0.68-0.75
Strength (N/grain): >50
Surface area (m2/g): 200~260
Pore volume (cm3/g): 0.40~0.46
Large hole (>750A): 0.14
Water absorption (%): >50

Application of activated alumina as adsorbent

The main liquids that activated alumina can be dried are: aromatic hydrocarbons, polymer olefins, gasoline, kerosene, cyclohexane, propylene, butene, and many halogenated hydrocarbons. When these liquids are in contact with alumina, the two will not react or polymerize. At the same time, the dry liquid does not contain components that are easily adsorbed on the alumina surface and are not easily removed during regeneration.

Factors affecting adsorption performance

1. Particle size: The smaller the particle size, the higher the adsorption capacity, but the smaller the particle size, the lower the particle strength, which affects its service life.
2. Raw water pH value: When the pH value is higher than 5, the lower the pH value, the higher the adsorption capacity of activated alumina.
3. Initial fluorine concentration in raw water: the higher the initial fluorine concentration, the larger the adsorption capacity.
4. The alkalinity of the raw water: the high concentration of bicarbonate in the raw water will reduce the adsorption capacity.
5. Chloride ion and sulfate ion.
6. The influence of arsenic: activated alumina has an adsorption effect on arsenic in water. The accumulation of arsenic on activated alumina causes a decrease in the adsorption capacity of fluoride ions, and makes it difficult to elute arsenic ions during regeneration.


Product detail pictures:

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures


Related Product Guide:

We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for Short Lead Time For Hydrogen Peroxide - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen , The product will supply to all over the world, such as: Swedish, Tunisia, Guinea, With its rich manufacturing experience, high-quality products, and perfect after-sale service, the company has gained good reputation and has become one of the famous enterprise specialized in manufacturing series.We sincerely hope to establish business relation with you and pursue mutual benefit.
  • Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Henry from Iraq - 2017.01.28 19:59
    The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Ryan from New Zealand - 2018.06.18 19:26
    Write your message here and send it to us

    Related products

    • Chinese Professional Tank Reactor - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen

      Chinese Professional Tank Reactor - Homogeneou...

      The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions. The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synt...

    • 18 Years Factory Nylon Polymerization - DDI, CAS: 68239-06-5 Dimeryl Diisocyanate, Dimeryl-di- isocyanate – Zipen

      18 Years Factory Nylon Polymerization - DDI, C...

      DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...

    • Free Sample For China Hydrothermal Autoclave With Teflon Lining - Hydrogen Peroxide Production Material 2-ethyl-Anthraquinone  – Zipen

      Free Sample For China Hydrothermal Autoclave Wi...

      Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes  Melting Point 109~111 ℃ EAQ content ≥  98.5 %  Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing

    • Super Lowest Price Nylon Reaction - Experimental rectification system – Zipen

      Super Lowest Price Nylon Reaction - Experiment...

      Product performance and structural features The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler’s weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control. The temperature of the rectification unit is achieved by the comprehensive cooperation of preheating, tower bottom temperature control and tower temperature control. The towe...

    • OEM Manufacturer Multiple Reaction System - Experimental polyether reaction system – Zipen

      OEM Manufacturer Multiple Reaction System - Ex...

      Product Description The whole set of reaction system is integrated on a stainless-steel frame. The PO/EO feeding valve is fixed on the frame to prevent the electronic scale measurement from being affected during operation. The reaction system is connected with stainless steel pipeline and needle valves, which is easy for disconnection and re-connection. The operating temperature, feeding flow rate, and PO/EO tank N2 pressure are automatically controlled by the computer. The industrial co...

    • Hot Sale Paraxylene Pilot - Hydrogen Peroxide Production Material 2-ethyl-Anthraquinone  – Zipen

      Hot Sale Paraxylene Pilot - Hydrogen Peroxide ...

      Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes  Melting Point 109~111 ℃ EAQ content ≥  98.5 %  Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing