• zipen

Catalyst evaluation system

Short Description:

Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under the conditions of temperature and pressure set by the user. 


Product Detail

Product Tags

This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions.

Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under the conditions of temperature and pressure set by the user.

Operating characteristics: The pressure stability of the system is precisely controlled by the cooperation of the inlet gas pressure control valve and the vent gas counterbalance valve. Temperature control adopts PID intelligent temperature control meter to control electric heating elements. For the temperature runaway caused by the exotherm in the reaction process, the computer will automatically complete the PID control by regulating the cooling water flow according to the degree of temperature runaway. The whole system integrates temperature, pressure, stirring, flow control, inlet gas pressure regulation, and pressure counterbalance into a cabinet.

The overall dimensions are 500*400*600.

Product Description

The pressure stability of the system is precisely controlled by the cooperation of the inlet gas pressure control valve and the vent gas counterbalance valve; The hydrogen gas flow is accurately measured by Brooks flowmeter, which is equipped with a bypass and a manual micro-control valve; According to the features of hydrogenation reaction, the control of reaction temperature is realized through PID control of the heating furnace and the cooling water flow rate as well as temperature runaway. The whole set of equipment is integrated in an overall frame, easy for installation and operation, safe and reliable.

Technical Specification

Reaction pressure 0.3MPa (3 bar)
Design pressure 1.0MPa (10 bar)
Reaction temperature 60℃, accuracy: ±0.5℃
Temperature runaway control Automatically control the cooling water flow, temperature runaway<2℃
Stirring speed 0-1500r/min
Effective volume 500ml
Inserted filter in reactor 15~20μm
Range of gas mass flow controller 200SCCM
Flow range of Rotameter 100ml/min
Pneumatic cooling water control valve CV: 0.2

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Experimental rectification system

      Experimental rectification system

      Product performance and structural features The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler's weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control. The temperature of the rectification unit is achieved by the comprehensive cooperation of prehe...

    • Experimental polyether reaction system

      Experimental polyether reaction system

      Product Description The whole set of reaction system is integrated on a stainless-steel frame. The PO/EO feeding valve is fixed on the frame to prevent the electronic scale measurement from being affected during operation. The reaction system is connected with stainless steel pipeline and needle valves, which is easy for disconnection and re-connection. The operating temperature, feeding flow rate, and P...

    • Experimental nitrile latex reaction system

      Experimental nitrile latex reaction system

      Basic Process Butadiene in the raw material tank is prepared in advance. At the beginning of the test, the system is vacuumed and replaced with nitrogen to ensure that the entire system is oxygen-free and water-free. Prepared with various liquid-phase raw materials and initiators and other auxiliary agents are added to the metering tank, and then the butadiene was transferred to the metering tank. Open t...

    • Experimental Nylon reaction system

      Experimental Nylon reaction system

      Product Description The reactor is supported on the aluminum alloy frame. The reactor adopts a flanged structure with a reasonable structure and a higher degree of standardization. It can be used for chemical reactions of various materials under high temperature and high pressure. It is especially suitable for stirring and reaction of high-viscosity materials. 1. Material: The reactor is mainly made of S...

    • Polymer polyols (POP) reaction system

      Polymer polyols (POP) reaction system

      Product Description This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions. Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve. The liquid material is accurately metered by an electroni...

    • Experimental PX continuous oxidation system

      Experimental PX continuous oxidation system

      Product Description The system adopts modular design concept, and all the equipment and pipelines are integrated in the frame. It includes three parts: feeding unit, oxidation reaction unit, and separation unit. Using advanced control technology, it can meet the special requirements of complex reaction system, high temperature and high pressure, explosiveness, strong corrosion, multiple constraint condit...