Experimental polyether reaction system
Product Description
The whole set of reaction system is integrated on a stainless-steel frame. The PO/EO feeding valve is fixed on the frame to prevent the electronic scale measurement from being affected during operation.
The reaction system is connected with stainless steel pipeline and needle valves, which is easy for disconnection and re-connection.
The operating temperature, feeding flow rate, and PO/EO tank N2 pressure are automatically controlled by the computer.
The industrial computer software can monitor various process parameters in real time, such as temperature, pressure, and flow, and can automatically adjust various process parameters according to the control program.
The historical data of each parameter can be displayed and recorded separately, and the storage time is longer than 7 days.
Technical Parameter
| Design pressure | 0.8Mpa |
| Reaction pressure | 0.6Mpa |
| Design temperature | 200℃ |
| Reaction temperature | 170℃ |
| Media of metering pump | PO/EO |
| Working flowrate of metering pump | 50-800g/h |
| Scale accuracy | 10Kg±0.1g |
Related products
-
Experimental rectification system
Product performance and structural features The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler's weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control. The temperature of the rectification unit is achieved by the comprehensive cooperation of prehe...
-
Polymer polyols (POP) reaction system
Product Description This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions. Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve. The liquid material is accurately metered by an electroni...
-
Catalyst evaluation system
This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions. Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under...
-
Pilot Reactor for PX Oxidation continuous exper...
Basic process: Preheat the system, and purge it with nitrogen until the oxygen content of the outlet tail gas is zero. Add liquid feed (acetic acid and catalyst) into the system and continuously heat the system to the reaction temperature. Add pure air, continue heating until the reaction is triggered, and start insulation. When the liquid level of reactants reaches the required height, start to control the discharge, and control the discharge speed to keep the liquid level stable. In the who...
-
Experimental PX continuous oxidation system
Product Description The system adopts modular design concept, and all the equipment and pipelines are integrated in the frame. It includes three parts: feeding unit, oxidation reaction unit, and separation unit. Using advanced control technology, it can meet the special requirements of complex reaction system, high temperature and high pressure, explosiveness, strong corrosion, multiple constraint condit...
-
Experimental Nylon reaction system
Product Description The reactor is supported on the aluminum alloy frame. The reactor adopts a flanged structure with a reasonable structure and a higher degree of standardization. It can be used for chemical reactions of various materials under high temperature and high pressure. It is especially suitable for stirring and reaction of high-viscosity materials. 1. Material: The reactor is mainly made of S...
