• zipen

Hydrogen Peroxide Stabilizer

Short Description:

The stabilizer is used to improve the stability of hydrogen peroxide. The product is acidic and soluble in water. It can be used in organic synthesis to improve the stability of hydrogen peroxide in the process of chemical synthesis.


Product Detail

Product Tags

Specification

TYPE II
Stannum containing stabilizer
Appearance Light yellow transparent liquid
Density (20℃)  ≥1.06g/cm3
PH value  1.0~3.0
Stabilizing effect on hydrogen peroxide   the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0%
TYPE IV
Phosphorus containing stabilizer
Appearance colorless transparent liquid
Density (20℃)  ≥1.03g/cm3
PH value  1.0~2.0
Stabilizing effect on hydrogen peroxide   the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0%

Usage

Add 10 ~ 100g of stabilizer per ton of hydrogen peroxide. The dosage can be appropriately reduced according to the stability of raw hydrogen peroxide. Fully mix it by stirring or clean air purging.

Package and storage

25kg PE barrel.

It should be stored in warehouses and sheds with ventilation, and the storage temperature should be below 35°C.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Hydrogen Peroxide Production Material 2-ethyl-Anthraquinone

      Hydrogen Peroxide Production Material 2-ethyl-A...

      Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. ...

    • DDI, CAS: 68239-06-5 Dimeryl Diisocyanate, Dimeryl-di- isocyanate

      DDI, CAS: 68239-06-5 Dimeryl Diisocyanate, Dime...

      DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing prop...

    • TOP, Tris(2-ethylhexyl) Phosphate, CAS# 78-42-2, Trioctyl Phosphate

      TOP, Tris(2-ethylhexyl) Phosphate, CAS# 78-42-2...

      Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point  ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; o...

    • Ceramic Ball

      Ceramic Ball

      Product description Specification 10 Φ / AL2O3 content ≥40% AL2O3+SiO2 ≥92% Fe2O3 content ≤1% Compressive strength ≥0.9KN/pc Heap proportion 1400kg/m3 Acid resistance ≥98% Alkali resistance ≥85% Ceramic ball mainly uses a-Al2O3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine g...

    • Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina

      Activated Alumina for H2O2 production, CAS#: 13...

      Specification Item         Crystalline phase r-Al2O3 r-Al2O3 r-Al2O3 r-Al2O3 Appearance White ball White ball White ball White ball Specific Surface (m2/g) 200-260 200-260 200-260 200-260 Pore volume(cm3/g) 0.40-0.46 0.40-0.46 0.40-0.46 0.40-0.46 Water absorption >52 >52 >52 >52 Particle size 7-14mesh 3-5mm 4-6mm 5-7mm Bulk density 0.76-0.85 0.65-0.72 0.64-0.70 0.64-0.68 St...